Three parts fail more often than anything else in a laundry appliance, and all three are seals: the rubber door boot on a front-load washer, the tub gasket behind it, and the felt seal that rings a dryer drum. All three get misdiagnosed as motor, pump, or heating element failures — repairs that cost several times more and don’t fix the problem.
Appliance Gasket repairs washers and dryers across Fairfax County — Fairfax City, Vienna, Burke, Oakton, and Fairfax Station included. We check the seal first, then work outward.
Same-Day Service · All Major Brands · 90-Day Warranty · Seal Specialists
Every appliance repair company in Fairfax County services washers and dryers. Almost none of them stock seals or treat them as a diagnosis, which is why a seal failure so often gets billed as something bigger.
Front-load, top-load, stacked, and commercial units across Fairfax City, Vienna, Burke, and the surrounding communities.
We rule out the door boot, tub gasket, and dryer felt seal before quoting a motor, pump, or heating element.
Door boot and tub gaskets differ by brand and by model line. We carry the exact part rather than a universal fit that's a rough match — which is why most jobs finish in one visit.
If the same issue returns inside 90 days, we come back at no additional charge.
Fill the form — we’ll confirm your slot and price today.
Most repair calls start with whatever part looks most obviously broken. We work in a fixed order instead, because seals fail earliest and cost least to replace.
Four problems account for most washer calls we take in Fairfax County. Three of them can originate at the seal, which is why the order we check them in matters.
Dryer symptoms overlap more than washer symptoms do — damp clothes can point to the element, the vent, or the door seal, and those are three very different repairs. Here’s how we separate them.
Where a seal fails first depends on the brand. Some front-loaders tear at the boot’s lower fold, some dryers wear the felt seal before anything else goes, and the mounting hardware differs enough between manufacturers that the wrong part won’t seat properly even when the size looks right. We confirm brand and model before sourcing.
Four steps from your first call to a tested machine, with the price fixed before anything starts.
Step one of the process
Call or send your brand, model, and what the machine is doing. A photo of the door seal helps.
One clear number before work starts. No hourly meter, no diagnostic fee.
A technician arrives anywhere in Fairfax County with seals and common parts already on the truck.
We fit the part, run a full cycle, and confirm the fix before leaving.
A failing seal on an otherwise healthy machine is worth fixing. A failing seal on a machine that’s already breaking down elsewhere usually isn’t. The difference comes down to what else is happening:
Send your brand, model, and the machine’s age through our contact page — we’ll tell you if a seal won’t solve it before you book.
Get your washer or dryer back to full working order. Fill out the quick form and we’ll be in touch.
A home washer runs a few loads a week. A laundromat machine runs that before noon. Seals wear on completely different timelines, and we schedule accordingly.
— SERVICE COVERAGE
We’re mobile across Fairfax County and the wider DMV — no drop-off, no hauling a stacked unit out of a laundry closet.
Please note: We only take service requests inside these areas
Oakton, VA 22124
Burke, VA 22015
Fairfax Station, VA 22039
Vienna, VA 22180
Merrifield, VA 22031
Annandale, VA 22003
Tysons, VA 22102
West Springfield, VA 22152
Centreville, VA 20120
Chantilly, VA 20151
Springfield, VA 22150
Falls Church, VA 22046
Reston, VA 20190
McLean, VA 22101
Franconia, VA 22310
Herndon, VA 20170
Kingstowne, VA 22315
Great Falls, VA 22066
Lorton, VA 22079
Arlington, VA
Don’t let a leak or a smell that won’t wash out turn into a bigger repair. Part shipped, guided over the phone, or a technician at your door — backed by a 90-day warranty.
Get a Free Quote · Call (202) 200-8501
Because the mold isn’t in the drum, it’s in the gasket folds where moisture and detergent residue collect. Cleaning cycles don’t reach there. Once it’s set into the rubber, replacing the seal is the only permanent fix.
Most often a door gasket that’s torn or developed rigid spots and can’t hold a seal during the cycle. Hoses, pump seals, and inlet valve fittings are the other common sources — we check which before quoting.
Yes, and it’s routinely missed. A worn felt seal or a door that won’t latch tight lets heat escape while the drum turns. Clothes come out damp, which looks exactly like a failed heating element.
Replace the seal if the drum spins evenly and the door locks properly. Replace the machine only if the seal issue comes alongside bearing noise, a failed control board, or a unit well past ten years.
There’s no flat rate — the seal is a different part on every brand and model, and a compact stacked unit isn’t comparable to a full-size front-loader. Send your model number and you get one exact price before any work begins, with no diagnostic fee.
Yes. Stacked units and tight laundry closets need different access tools than a standard front-load install, and we bring them.
Parts and labor for 90 days. If the same problem returns in that window, we return at no extra charge.
Tell us your appliance and we’ll send a free, no-obligation quote.
A washer leaking mid-cycle isn’t a next-week problem — standing water reaches subfloor fast. Mention it’s urgent when you call and we’ll move you ahead of routine bookings.